Reactor

  • AC line input reactor, voltage drop 2%~4% for inverter and converter

    AC line input reactor, voltage drop 2%~4% for i...

    Model Specifications Match the power(KW) rated current reduction voltage insulation grade  boundary dimension(mm)  mounting dimension A×B MTACL-1.5 (0.75) 1.5 8 2%~4% F,H 100×90×110 80×65 MTACL-2.2 2.2 8 2%~4% F,H 100×90×110 80×65 MTACL-3.7 3.7 10 2%~4% F,H 160×120×140 80×60 MTACL-5.5 5.5 15 2%~4% F,H 160×120×140 80×60 MTACL-7.5 7.5 20 2%~4% F,H 160×120×140 80×60 MTACL-11 11 30 2%~4% F,H 160×120×140 80×60 MTACL-15 15 40 2%~4% F,H 160×120×140 80×60 MTACL-18.5 18.5 50 2%~4% F...

  • Balance reactor

    Balance reactor

    First, use When the AC asynchronous motor is started at rated voltage, the initial starting current is very large, often exceeding many times the rated current (usually 5 to 7 times), in order to reduce the starting. The current does not affect the power grid. Usually, the AC asynchronous motor is started by reducing the voltage. The commonly used step-down method is to use a reactor or a self-twisting transformer. The starting process of the flow motor is very short (usually a few seconds to...

  • Input and output reactor

    Input and output reactor

    Input and output reactors for variable frequency speed regulation: Inverters and governors are often subject to surge currents and surge voltages during use. Impact, which will seriously damage the performance and service life of the inverter and governor, so install an input reactor in front of it to suppress the surge. Voltage and surge currents protect the frequency converter and governor, extend their service life and prevent harmonic interference, while the inverter and governor are It...

  • DC smoothing reactor

    DC smoothing reactor

    DC smoothing reactors are mainly used in the circuit to improve the quality of the power grid, improve the power factor only, I often produce DC flat wave reactance The machine is made of high-quality imported cold-rolled steel sheet, which has small volume, low temperature rise and no noise. The current specification is from 2A-10KA. Not equal, the voltage is from 220V-2000V, some specifications are available in stock, customers are welcome to inquire. The above layout is limited, only some...